Skip to product information
1 of 4

Aims Power

PICOGLF20W48V120VR Aims Power Inverter Charger 2000W, 6000W Surge, Pure Sine, 48vDC To 120vAC | 16.48" L X 8.74" W X 7.1" H | 42 Lbs

Regular price $915.00 USD
Regular price Sale price $915.00 USD
Sale Sold out
Tax included.

This is an industrial-grade unit with the ability to withstand surges of up to 6000 watts for 20 seconds, and it achieves this by virtue of its direct connect terminal block. This feature is one of the more sought-after in the inverter industry, allowing users to surpass the 1,500 watt maximum output of a GFCI outlet that would typically be seen on an inverter.

The 2000 watt 48 volt low frequency AIMS Power inverter charger transforms DC (direct current) power, produced by solar panels and stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home.

Use this product for renewable solar, off-grid home or business, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank.

This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan.

This inverter is also available in 12 and 24 volt models. The 2000 watt 12 volt Pure Sine Inverter Charger and 2000 watt 24 volt Pure Sine Inverter Charger are in stock and ready for same-day shipping as well.

Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more. Or use it to power appliances in your RV, as it won’t produce any annoying noise or pollution.

A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (when compared to modified sine units) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance.

The inverter also has conformal-coated (marine-coated) boards, making it marine-grade and resistant to dust and/or water vapor that travel through the air and could otherwise be damaging to the unit. This feature is great for boating applications, like powering a stereo system, for instance.

Features

2000 watt low frequency inverter
6000 watt surge for 20 seconds 300% surge capability
Battery priority selector
AC direct connect terminal block
Marine coated and protected
Multi stage smart charger 20 Amp for gel, AGM, lead and lithium LiFePO4
Remote panel available
Auto frequency
10msec typical transfer time
selectable 25W power save mode (hibernation)
7 battery type settings for charger
Automatic transfer switch

Specifications

Continuous Output Power: 2000 Watts
Surge Rating: 6000 Watts (20 Seconds)
Output Waveform: Pure Sine/Same as input (Bypass Mode)
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
Typical Transfer Time: 10ms (Max)
THD: < 10% DC
Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Nominal Input Voltage: 48.0Vdc
Minimum Start Voltage: 40.0Vdc
Low Battery Alarm: 42.0Vdc-44.0Vdc
Low Battery Trip: 40.0Vdc-42.0Vdc
High Voltage Alarm: 64.0Vdc
Low Battery Voltage Restart: 53.2Vdc
Idle Consumption: 28 watts
Power Saver Mode Idle Consumption: 12.7 Watts
Output voltage: depends on battery type
Charger rate: 20A
Over charge protection shutdown: 62.8V
Selectable charge setting: based on battery type
Adjustable charge current off: -20%-100%
Four stage smart charger
Transfer Switch Specifications: 30 amp auotmatic transfer switch ,10 ms (max)
Unit Weight: 42 lbs.
Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches
Shipping Weight: 53 lbs.
Shipping L x W x H: 23.5 x 13.0 x 12.5 inches

Documentation

Manual, https://cdn.shopify.com/s/files/1/0215/6442/4264/files/PICOGLF1-6W_4821_12.pdf?v=1671703135